Encho Enchev - ETE Street & Urban Furniture

MATERIALS

ALL MATERIALS USED IN THE MANUFACTURE OF THE PRODUCTS ARE RECYCABLE. 

WARNING

Encho Enchev - ETE reserves the right to make changes, updates, and improvements to both the surface coatings and the type of materials used to meet production requirements and ensure the quality of the final product. The Company also reserves the right to remove and/or replace displayed materials at its sole discretion, as well as to add new ones. Any changes made are announced on the company's website in the "Materials" section and/or through information accompanying the sale or by other appropriate means. The most up-to-date information on the specified materials is always valid.

GENERAL REQUIREMENTS APPLICABLE TO ALL ENCHO ENCHEV – ETE PRODUCTS OF ALL MATERIALS

Upon receipt of the products, if they cannot be placed and/or installed within a few days (no more than 2 days), they must be removed/unpacked from the shipping packaging (plastic, nylon, paper, etc.) immediately. This will provide ventilation and prevent the formation of condensation that can damage the product beyond repair.

Concrete

Types of concrete

#11 grey concrete
#12 white concrete

High quality grey or white Portland cement is used in the production of the high performance concrete (HPC) in combination with natural marble or granite aggregates and inert materials. Concrete structure is reinforced. Concrete is recyclable due to the absence of resins and adhesive polymeric agents.

Natural marble aggregates

POLISHED AGGREGATE

#31 white
#34 scatter
#35 grey
#22 brown
#26 yellow
#27 red
#28 blue
#29 green

Polished surface : treatment performed either mechanically or manually, removing the surface layer and revealing the homogeneous structure of the material. This type of treatment creates a characteristic smooth surface.

The additionally applied impregnant and lacquer finish give the product excellent anti-corrosion, UV protection and a refined finish.

EMBOSSED AGGREGATE

#51 white
#52 scatter
#53 grey
#42 brown

Embossed surface : treatment performed either mechanically or manually. This type of processing allows the natural marble or granite aggregates to stand out and emphasize the depth of the structure.

The additionally applied impregnant and lacquer finish give the product excellent anti-corrosion, UV protection and a refined finish.

The aggregates are a mixture of multi-colored, natural, marble or granite stone fractions with Portland cement and inert materials. The particles have selected structural characteristics and are available in various combinations with grey or white Portland cement, depending on their properties and requirements for the manufacture of the products.


CHARACTERISTICS AND MAINTENANCE

Not all products are available in all types of treatments and coatings. To check the types of treatments and coatings available for each product, please see the section on the specific product.
The higher weight products are fitted with stainless steel threads (dowels), where ring bolts can be fitted for ease of installation and transportation.
To keep the product's appearance unchanged for a long period of time, we recommend cleaning of the products with water and a suitable detergent and periodically impregnated. Recommendations for cleaning and maintenance can be found "here".
For more information on our products, contact the company.

Wood/Timber

SOFTWOOD - PINE (SPRUCE)

#61 pine color
#62 walnut color
#64 rosewood color
#65 oak color

Spruce is offered as solid wood with a selected part of the structure of the tree. The wood is treated with a water-based pigmented impregnator. Color range is selected and ordered upon request by the customer and is available in the following options: pine color, walnut color, mahogany color, rosewood color, oak color.

HARDWOOD – BAMBOO, IROKO

#66 BAMBOO
#67 IROKO

Hardwood is available on request and Encho Enchev - ETE reserves the right to choose the most appropriate type of hardwood depending on the product and the availability of the relevant type of exotic wood on the market.

  • Bamboo wood is heat-treated and highly compressed during the special production process. As a result of this process, a material with extremely high technical strength and durability characteristics is obtained. It is designed to withstand extreme loads. The product is carbonized and special care coated. The company Encho Enchev - ETE offers rhythmic deliveries of this type of raw material and is a preferred product because of its characteristics.

  • Iroko is treated with oil for a better aesthetic appearance, but is also weather resistant without coating due to the high density and hardness of the wood.

Wood is a natural material, and every beam/plank is not identical to the others. There may be slight differences in the appearance of the wood grain, the tone, and the natural imperfections, despite the processing As the weather changes (hot climate, dry climate, humid climate, cold climate), the wood structure changes and can increase or decrease its volume, causing cracks or fissures. Although it is a natural process, it should be noted.

To minimize the effects of weather conditions, the boards are treated with high-performance impregnants and water-based varnishes that extend the life of the wood and slow down the aging of the material. This procedure does not cancel the subsequent periodic maintenance of the timber in order to keep its quality for as long as possible.

Depending on the type of wood, a certain color range is available, which is ordered upon request by the client. Encho Enchev - ETE works with FSC certified timber. The timber is delivered to the end user without the need of subsequent mechanical treatment.


CHARACTERISTICS AND MAINTENANCE

Not all products are available in all types of treatments and coatings. To check the types of treatments and coatings available for each product, please see the section on the specific product.
To keep the product's appearance unchanged for a long period of time, we recommend that the products be cleaned with water and a suitable detergent and periodically impregnated. Recommendations for cleaning and maintenance can be found "here".
For more information on our products, contact the company.

ECO Wood/Timber - Resysta®

#R1 Eco wood

The material of the future

Extremely resistant and highly durable, Resysta® material is very similar in appearance and feel to tropical wood. The specially treated surface makes this possible and thus enables it to exude the same warmth and comfort as natural wood.
Thanks to its exceptional composition, Resysta® material does not crack, swell or decay, far surpassing its natural model in terms of characteristics, durability, and resistance.

Composition

Not even a single tree has to be cut down to produce Resysta®. The fiber-reinforced hybrid material consists of 60% rice husk (a waste product from the food industry), 22% common salt, and 18% mineral oils. This makes Resysta® both environmentally friendly and extremely weatherproof against the sun (high UV stability), rain, snow, and saltwater (waterproof) as well as biological agents such as fungi and molds.

Advantages

  • 100% ecological and fully recyclable;
  • permanent UV stability (non-fading);
  • 15-year warranty against cracking, swelling, delamination, and decaying (provided by the manufacturer of the material);
  • the sustainable alternative of wood and WPC (wood-plastic composite);
  • does not change its characteristics in cold, warm, and humid climates;
  • resistant to molds, fungi, insects, and other parasites;
  • resistant to salty and chlorinated water;
  • has the look and feel of tropical wood;
  • minimum care and easy maintenance;

 

Aesthetics and more

Thanks to its characteristics, the Resysta® material meets all modern requirements in architecture and landscape. The use of Resysta® in architectural projects can contribute additional points towards LEED certification.

CHARACTERISTICS AND MAINTENANCE

Not all products are available in all types of treatments and coatings. To check the types of treatments and coatings available for each product, please see the section on the specific product.
To keep the product's appearance unchanged for a long period of time, we recommend that the products be cleaned with water and a suitable detergent and periodically impregnated. Recommendations for cleaning and maintenance can be found "here".
For more information on our products, contact the company.


Steel

METAL ELEMENTS COATINGS - RAL COLORS

RAL 7024
RAL 9007
RAL 9006
RAL 3001
RAL 9005
RAL 1021
RAL 5015
RAL 6032
RAL 1037

METAL ELEMENTS COATINGS - SPECIAL TEXTURED COLORS

#82 DARK RUST
#83 LIGHT RUST
#84 DARK RUST COMBINED
#85 LIGHT RUST COMBINED
#86 PEARL MOUSE GREY
#87 BLACK PEARL
#88 WHITE PEARL
#89 VERSAILES SILVER
#90 VERSAILES GOLD
#91 SILVER PEARL
#91 GOLDEN PEARL

The company Encho Enchev - ETE uses polyester paints with a pearl matte effect as standard, which provide a textured opaque coating. To compare relative RAL colors, use the commercial RAL palette. Colors outside the specified color range of Encho Enchev - ETE are subject to an additional charge.

Special textured colors possess a characteristic fine texture and density combined with a pearlescent sheen. These polyester powder coatings are primarily developed for the architectural sector and stand out for their high durability, strength, and excellent chemical and UV resistance. The wide color range offers a rich selection, making them the perfect addition to any interior and landscape design.

Processing of steel elements of different thickness and of different brands, depending on the specification of the product, goes through the following steps:

  • cleaning of the steel with a shot blasting machine
  • electrogalvanization*
  • application of zinc ester-epoxide hybrid primer 
  • application of electrostatic solid powdered polyester

(*) This treatment increases the corrosion resistance of the steel.

STAINLESS STEEL

#81 AISI 304
#93 AISI 430

Encho Enchev - ETE uses AISI 304 and AIS 430 stainless steel.

Stainless steel type AISI 430 has a mandatory surface coating for guaranteed long-term resistance.


CHARACTERISTICS AND MAINTENANCE

Not all products are available in all types of treatments and coatings. To check the types of treatments and coatings available for each product, please see the section on the specific product.
To keep the product's appearance unchanged for a long period of time, we recommend that the products be cleaned with water and a suitable detergent and periodically impregnated. Recommendations for cleaning and maintenance can be found "here".
For more information on our products, contact the company.


Back
Search
Sending...